Store 2.0

Aus Store2 Wiki
Zur Navigation springen Zur Suche springen

Raid nach Booten öffnen und mount

Um Auto-Assembly beim Booten zu verhindern muss die Config-Datei /etc/mdadm.conf leer (oder zumindest komplett auskommentiert sein) und "MDADM_SCAN=no" in /etc/sysconfig/mdadm

1.) Checken ob alle Platten da sind: 

/root/bin/diskserial_sort2.sh

Müssen im Moment 17 Platten sein.

2.) Raids suchen und assemblen (kein Autostart): 

mdadm --assemble --scan

3.) Cryptsetup: 

cryptsetup luksOpen /dev/md125 cr_md125

4.) Mounten: 

mount /dev/mapper/cr_md125 /data

Schliessen wäre: 

cryptsetup luksClose cr_md125

Festplatten-Layout

3000GB Hitachi Deskstar 5K3000 HDS5C3030ALA630 CoolSpin 32MB 3.5" (8.9cm) SATA 6Gb/s

Serial auslesen mit: 

udevadm info --query=all --name=/dev/sdi | grep ID_SERIAL_SHORT

Serial Systemplatte 160GB: 

JC0150HT0J7TPC

Serials der Datenplatten

00  : 00000000000000 (1TB System, Samsung)

geht 

01  :
02  : 
03  : MJ1311YNG3SSLA (3TB)
04  :
05  : MJ1311YNG3NZ3A (3TB)

geht jetzt auch, Molex-Kontakt Problem behoben 

06  : 
07  : MJ1311YNG4J48A (3TB)
08  : 
09  : MJ1311YNG3UUPA (3TB)
10  :

geht 

11  : MJ1311YNG3SAMA (3TB)
12  :
13  : MJ1311YNG3SU1A (3TB)
14  : 
15  :

geht 

16  :
17  : 
18  : MJ1311YNG3Y4SA (3TB)
19  : 
20  : MJ1311YNG3Y5RA (3TB)

geht jetzt auch, Molex-Kontakt Problem behoben 

21  : 
22  : WD-WCAWZ2279670 (3TB WD)
23  : 
24  : MJ1311YNG25Z6A (3TB)
25  :

geht 

26  : MJ1311YNG3RM5A (3TB)
27  : 
28  : MJ1311YNG3NT5A (3TB)
29  : 
30  :

geht 

31  :
32  : 
33  : MJ1311YNG3WZVA (3TB)
34  : 
35  : MJ1311YNG3SYKA (3TB)

geht 

36  : 
37  : 
38  : 
39  : MJ1311YNG3RZTA (3TB)
40  :

geht 

41  : MJ1311YNG3LTRA (3TB)
42  : 
43  : MJ1311YNG38VGA (3TB)
44  :
45  :

TOTAL ACTIVE: 17 (16 + eine Systemplatte) von 46 möglichen

Raid Baubefehl

im Screen mdadm 

mdadm --create /dev/md125 --chunk=64 --level=raid6 --layout=ls --raid-devices=15 /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 /dev/sdf1 /dev/sdg1 /dev/sdh1 /dev/sdi1 /dev/sdj1 /dev/sdk1 /dev/sdl1 /dev/sdm1 /dev/sdn1 /dev/sdo1 /dev/sdp1

Raid-Baustatus

cat /proc/mdstat

automatisch jede Sekunde aktualisiert 

watch -n 1 cat /proc/mdstat

Verschlüssel von Hand (ohne Yast2)

Verschlüsseln: 

cryptsetup -v --key-size 256 luksFormat /dev/md125

Mit speziellen Paramtern für Hardware-Verschlüsselung: 

cryptsetup -v luksFormat --cipher aes-cbc-essiv:sha256 --key-size 256 /dev/md125

Öffnen: 

cryptsetup luksOpen /dev/md125 cr_md125

Filesystem drauf: 

mkfs.xfs /dev/mapper/cr_md125 

store2:~ # mkfs.xfs /dev/mapper/cr_md125
meta-data=/dev/mapper/cr_md125   isize=256    agcount=36, agsize=268435424 blks
         =                       sectsz=512   attr=2, projid32bit=0
data     =                       bsize=4096   blocks=9523357168, imaxpct=5
         =                       sunit=16     swidth=208 blks
naming   =version 2              bsize=4096   ascii-ci=0
log      =internal log           bsize=4096   blocks=521728, version=2
         =                       sectsz=512   sunit=16 blks, lazy-count=1
realtime =none                   extsz=4096   blocks=0, rtextents=0


Status: 

cryptsetup luksDump /dev/md125

Grown

Festplatte vorbereiten 

Open gdisk with the first hard drive:

$ gdisk /dev/sda

and type the following commands at the prompt: 

   Add a new partition: n
   Select the default partition number: Enter
   Use the default for the first sector: Enter
   For sda1 and sda2 type the appropriate size in MB (i.e. +100MB and +2048M). For sda3 just hit Enter to select the remainder of the disk.
   Select Linux RAID as the partition type: fd00
   Write the table to disk and exit: w

Bad Blocks

badblocks -vs -o sdy-badblock-test /dev/sdy

verbose, show progress, output-file (log) badblocks sucht nur nach bad blocks, zerstört aber keine Daten

Device zum Raid hinzufügen 

mdadm --add /dev/md127 /dev/sdg1

Raid reshapen mit zusätzlichem Device (dauert ca. 2 volle Tage) 

mdadm --grow --raid-devices=19 /dev/md127 --backup-file=/home/gagi/mda127backup

um zu sehen, wer/was gerade Zugriff nimmt: 

lsof /data

Samba-Service beenden: 

rcsmb stop

Unmounten: 

umount /data


XFS (Data)

XFS checken (ungemountet) 

xfs_repair -n -o bhash=1024 /dev/mapper/cr_md127

Cryptcontainer wachsen 

cryptsetup --verbose resize cr_md127

Mounten: 

mount /dev/mapper/cr_md127 /data

XFS vergrößern 

xfs_growfs /data

XFS checken (ungemountet) 

xfs_repair -n -o bhash=1024 /dev/mapper/cr_md127


Read-Only Mounten: 

mount -o ro /dev/mapper/cr_md127 /data

Samba-Freigabe

There's a bug in Samba in openSuse 11.4. Here's the workaround: 

   go to Yast --> AppArmor --> Control Panel (on) --> Configure Profile Modes --> usr.sbin.smbd = complain
   go to Yast --> system --> runlevels --> smb=on + nmb=on
   reboot

Direkte Netwerkverbindung Store1 <-> Store 2.0

du kannst auch mal schauen was in /etc/udev/rules.d/70-persistent-net... (oder wie auch immer die date heißt) steht.

da wird die mac einer bestimmten netzwerkadresse (eth0, eth1, ...) zugewiesen.

die datei kannst du auch löschen oder verschieben - wird beim neustart neu angelegt.

da kommt machmal was durcheinander - bei 'nem kernelupdate oder bios-update.

GEHT ! unterschiedliche subnets (192.168.2.100 und 192.168.2.102)

Fast-Copy

1.) Empfänger (Store2.0) 

cd <Zielverzeichnis> 
netcat -l -p 4323 | gunzip | cpio -i -d -m

2.) Sender (Store) 

cd <Quellverzeichnis>
find . -type f | cpio -p | gzip -1 | netcat 192.168.2.102 4323



1.) Empfänger (Store2.0) 

socat tcp4-listen:4323 stdout | tar xvpf - /data/eBooks

2.) Sender (Store) 

tar cvf - /data/eBooks | socat stdin tcp4:192.168.2.102:4323


Test mit Fortschrittsanzeige bei bekannter Datengröße:

1.) Empfänger (Store2.0) 

cd <Zielverzeichnis> 
socat tcp4-listen:4323 stdout | pv -s 93G | tar xvpf -

2.) Sender (Store) 

cd <Quellverzeichnis> 
tar cvf - * | pv -s 93G | socat stdin tcp4:192.168.2.102:4323


dd if=/dev/sdl | bar -s 1.5T | dd of=/dev/sdw

Crashes

ArchLinux 2011-09-09

Sep  9 18:20:04 localhost kernel: [156439.479947] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
Sep  9 18:20:04 localhost kernel: [156439.480035] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
Sep  9 18:20:04 localhost kernel: [156439.486612] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
Sep  9 18:20:04 localhost kernel: [156439.503656] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
Sep  9 18:20:04 localhost kernel: [156439.504562] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
Sep  9 18:34:11 localhost -- MARK --
Sep  9 18:42:42 localhost kernel: [157797.911330] r8169: eth0: link up
Sep  9 18:54:11 localhost -- MARK --
Sep  9 19:14:11 localhost -- MARK --
Sep  9 19:34:11 localhost -- MARK --
Sep  9 19:54:11 localhost -- MARK --
Sep  9 20:14:11 localhost -- MARK --
Sep  9 20:27:32 localhost kernel: [164086.971566] r8169: eth0: link up
Sep  9 20:27:42 localhost kernel: [164097.580071] r8169: eth0: link up
Sep  9 20:27:50 localhost kernel: [164105.391755] r8169: eth0: link up
Sep  9 20:27:51 localhost kernel: [164106.272019] r8169: eth0: link up
Sep  9 20:28:12 localhost kernel: [164127.150062] r8169: eth0: link up
Sep  9 20:28:22 localhost kernel: [164137.941304] r8169: eth0: link up
Sep  9 20:28:33 localhost kernel: [164148.890097] r8169: eth0: link up
Sep  9 20:28:38 localhost kernel: [164153.080536] r8169: eth0: link up
Sep  9 20:28:58 localhost kernel: [164173.790064] r8169: eth0: link up
Sep  9 20:42:19 localhost kernel: [    0.000000] Initializing cgroup subsys cpuset
Sep  9 20:42:19 localhost kernel: [    0.000000] Initializing cgroup subsys cpu
Sep  9 20:42:19 localhost kernel: [    0.000000] Linux version 2.6.32-lts (tobias@T-POWA-LX) (gcc version 4.6.1 20110819    (prerelease) (GCC) ) #1 SMP Tue Aug 30 08:59:44 CEST 2011
Sep  9 20:42:19 localhost kernel: [    0.000000] Command line: root=/dev/disk/by-uuid/ba47ea9a-c24c-4dc6-a9a2-ca3b442bdbfc ro vga=0x31B
Sep  9 20:42:19 localhost kernel: [    0.000000] KERNEL supported cpus:
Sep  9 20:42:19 localhost kernel: [    0.000000]   Intel GenuineIntel
Sep  9 20:42:19 localhost kernel: [    0.000000]   AMD AuthenticAMD
Sep  9 20:42:19 localhost kernel: [    0.000000]   Centaur CentaurHauls

OpenSuse 2011-09-26

Sep 26 23:15:59 store2 su: (to nobody) root on none
Sep 26 23:17:17  su: last message repeated 2 times
Sep 26 23:25:23 store2 smartd[4617]: Device: /dev/sdc [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 166 to 162
Sep 26 23:25:26 store2 smartd[4617]: Device: /dev/sde [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 171 to 166
Sep 26 23:25:29 store2 smartd[4617]: Device: /dev/sdg [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 171 to 166
Sep 26 23:25:36 store2 smartd[4617]: Device: /dev/sdk [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 171 to 166
Sep 26 23:25:37 store2 smartd[4617]: Device: /dev/sdl [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 181 to 187
Sep 26 23:55:22 store2 smartd[4617]: Device: /dev/sdb [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 100 to 96
Sep 26 23:55:23 store2 smartd[4617]: Device: /dev/sdc [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 162 to 166
Sep 26 23:55:26 store2 smartd[4617]: Device: /dev/sde [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 100 to 99
Sep 26 23:55:26 store2 smartd[4617]: Device: /dev/sde [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 166 to 171
Sep 26 23:55:29 store2 smartd[4617]: Device: /dev/sdg [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 166 to 171
Sep 26 23:55:32 store2 smartd[4617]: Device: /dev/sdi [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 100 to 98
Sep 27 00:55:26 store2 kernel: imklog 5.6.5, log source = /proc/kmsg started.

OpenSuse2011-09-27

Sep 27 16:35:17 store2 smbd[29588]: [2011/09/27 16:35:17.391212,  0] param/loadparm.c:8445(check_usershare_stat)
Sep 27 16:35:17 store2 smbd[29588]:   check_usershare_stat: file /var/lib/samba/usershares/ owned by uid 0 is not a regular file
Sep 27 16:44:06 store2 smbd[29163]: [2011/09/27 16:44:06.795153,  0] lib/util_sock.c:474(read_fd_with_timeout)
Sep 27 16:44:06 store2 smbd[29163]: [2011/09/27 16:44:06.795341,  0] lib/util_sock.c:1441(get_peer_addr_internal)
Sep 27 16:44:06 store2 smbd[29597]: [2011/09/27 16:44:06.795323,  0] lib/util_sock.c:474(read_fd_with_timeout)
Sep 27 16:44:06 store2 smbd[29163]:   getpeername failed. Error was Der Socket ist nicht verbunden
Sep 27 16:44:06 store2 smbd[29592]: [2011/09/27 16:44:06.795368,  0] lib/util_sock.c:474(read_fd_with_timeout)
Sep 27 16:44:06 store2 smbd[29163]:   read_fd_with_timeout: client 0.0.0.0 read error = Die Verbindung wurde vom Kommunikationspartner zurückgesetzt.
Sep 27 16:44:06 store2 smbd[29597]: [2011/09/27 16:44:06.795422,  0] lib/util_sock.c:1441(get_peer_addr_internal)
Sep 27 16:44:06 store2 smbd[29597]:   getpeername failed. Error was Der Socket ist nicht verbunden
Sep 27 16:44:06 store2 smbd[29597]:   read_fd_with_timeout: client 0.0.0.0 read error = Die Verbindung wurde vom Kommunikationspartner zurückgesetzt.
Sep 27 16:44:06 store2 smbd[29592]: [2011/09/27 16:44:06.795468,  0] lib/util_sock.c:1441(get_peer_addr_internal)
Sep 27 16:44:06 store2 smbd[29592]:   getpeername failed. Error was Der Socket ist nicht verbunden
Sep 27 16:44:06 store2 smbd[29592]:   read_fd_with_timeout: client 0.0.0.0 read error = Die Verbindung wurde vom Kommunikationspartner zurückgesetzt.
Sep 27 16:45:42 store2 smbd[29585]: [2011/09/27 16:45:42.499038,  0] lib/util_sock.c:474(read_fd_with_timeout)
Sep 27 16:45:42 store2 smbd[29593]: [2011/09/27 16:45:42.499082,  0] lib/util_sock.c:474(read_fd_with_timeout)
Sep 27 16:45:42 store2 smbd[29593]: [2011/09/27 16:45:42.499174,  0] lib/util_sock.c:1441(get_peer_addr_internal)
Sep 27 16:45:42 store2 smbd[29585]: [2011/09/27 16:45:42.499174,  0] lib/util_sock.c:1441(get_peer_addr_internal)
Sep 27 16:45:42 store2 smbd[29593]:   getpeername failed. Error was Der Socket ist nicht verbunden
Sep 27 16:45:42 store2 smbd[29585]:   getpeername failed. Error was Der Socket ist nicht verbunden
Sep 27 16:45:42 store2 smbd[29593]:   read_fd_with_timeout: client 0.0.0.0 read error = Die Verbindung wurde vom Kommunikationspartner zurückgesetzt.
Sep 27 16:45:42 store2 smbd[29585]:   read_fd_with_timeout: client 0.0.0.0 read error = Die Verbindung wurde vom Kommunikationspartner zurückgesetzt.
Sep 27 19:35:14 store2 kernel: imklog 5.6.5, log source = /proc/kmsg started.

OpenSuse 2011-09-29

während kräftigem Copyjob von Store 

Sep 29 23:16:19  su: last message repeated 2 times
Sep 29 23:28:41 store2 smartd[4624]: Device: /dev/sdb [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 157 to 162
Sep 29 23:28:44 store2 smartd[4624]: Device: /dev/sdd [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 153 to 157
Sep 29 23:28:49 store2 smartd[4624]: Device: /dev/sdh [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 100 to 99
Sep 29 23:28:53 store2 smartd[4624]: Device: /dev/sdk [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 162 to 157
Sep 29 23:28:57 store2 smartd[4624]: Device: /dev/sdo [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 176 to 181
Sep 29 23:58:44 store2 smartd[4624]: Device: /dev/sdd [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 100 to 99
Sep 29 23:58:49 store2 smartd[4624]: Device: /dev/sdh [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 99 to 100
Sep 29 23:58:53 store2 smartd[4624]: Device: /dev/sdk [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 157 to 162
Sep 29 23:58:57 store2 smartd[4624]: Device: /dev/sdn [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 187 to 193
Sep 29 23:58:58 store2 smartd[4624]: Device: /dev/sdo [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 181 to 176
Sep 29 23:59:02 store2 smartd[4624]: Device: /dev/sdq [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 176 to 181
Sep 30 00:28:41 store2 smartd[4624]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 187 to 193
Sep 30 00:28:43 store2 smartd[4624]: Device: /dev/sdd [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 99 to 100
Sep 30 00:28:49 store2 smartd[4624]: Device: /dev/sdh [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 100 to 99
Sep 30 00:28:58 store2 smartd[4624]: Device: /dev/sdo [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 176 to 181
Sep 30 00:58:47 store2 smartd[4624]: Device: /dev/sdf [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 100 to 99
Sep 30 00:58:49 store2 smartd[4624]: Device: /dev/sdh [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 99 to 100
Sep 30 00:58:59 store2 smartd[4624]: Device: /dev/sdp [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 100 to 99
Sep 30 01:28:47 store2 smartd[4624]: Device: /dev/sdf [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 99 to 100
Sep 30 01:28:47 store2 smartd[4624]: Device: /dev/sdf [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 157 to 162
Sep 30 01:28:50 store2 smartd[4624]: Device: /dev/sdi [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 100 to 99
Sep 30 01:58:47 store2 smartd[4624]: Device: /dev/sdf [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 162 to 157
Sep 30 01:59:00 store2 smartd[4624]: Device: /dev/sdp [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 99 to 100
Sep 30 02:28:45 store2 smartd[4624]: Device: /dev/sdd [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 100 to 99
Sep 30 02:28:46 store2 smartd[4624]: Device: /dev/sde [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 100 to 99
Sep 30 02:28:46 store2 smartd[4624]: Device: /dev/sde [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 157 to 162
Sep 30 02:28:48 store2 smartd[4624]: Device: /dev/sdf [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 100 to 99
Sep 30 02:28:52 store2 smartd[4624]: Device: /dev/sdi [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 99 to 100
Sep 30 02:58:45 store2 smartd[4624]: Device: /dev/sdd [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 99 to 100
Sep 30 02:58:46 store2 smartd[4624]: Device: /dev/sde [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 99 to 100
Sep 30 02:58:46 store2 smartd[4624]: Device: /dev/sde [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 162 to 157 
Sep 30 02:58:47 store2 smartd[4624]: Device: /dev/sdf [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 99 to 100
Sep 30 02:58:49 store2 smartd[4624]: Device: /dev/sdh [SAT], SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 100 to 99
Sep 30 09:39:22 store2 kernel: imklog 5.6.5, log source = /proc/kmsg started.

What you are seeing are the Normalized Attribute values changing.

For example when the Raw_Read_Error_Rate changed from 99 to 100, the increase in Normalized value from 99 to 100 means that the disk now thinks it is a bit LESS likely to fail than before, because this Normalized value is moving further above the (low) Threshold value.

ArchLinux 2011-10-17

Oct 17 21:21:35 localhost smartd[1941]: Device: /dev/sdc [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 181 to 176
Oct 17 21:21:37 localhost smartd[1941]: Device: /dev/sde [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 181 to 176
Oct 17 21:21:45 localhost smartd[1941]: Device: /dev/sdm [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 200 to 206
Oct 17 21:30:03 localhost -- MARK --
Oct 17 21:50:03 localhost -- MARK --
Oct 17 21:51:37 localhost smartd[1941]: Device: /dev/sde [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 176 to 181
Oct 17 21:51:41 localhost smartd[1941]: Device: /dev/sdi [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 181 to 187
Oct 17 22:10:03 localhost -- MARK --
Oct 17 22:21:34 localhost smartd[1941]: Device: /dev/sdc [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 176 to 181
Oct 17 22:21:47 localhost smartd[1941]: Device: /dev/sdo [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 206 to 214
Oct 17 22:21:49 localhost smartd[1941]: Device: /dev/sdq [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 206 to 214
Oct 17 22:30:03 localhost -- MARK --
Oct 17 22:50:03 localhost -- MARK --
Oct 17 23:11:18 localhost kernel: [    0.000000] Initializing cgroup subsys cpuset
Oct 17 23:11:18 localhost kernel: [    0.000000] Initializing cgroup subsys cpu

ArchLinux 2011-11-06

Nov  6 12:39:05 localhost -- MARK --
Nov  6 12:42:18 localhost smartd[1927]: Device: /dev/sdi [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 193 to 200
Nov  6 12:42:20 localhost smartd[1927]: Device: /dev/sdj [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 193 to 187
Nov  6 12:42:24 localhost smartd[1927]: Device: /dev/sdn [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 222 to 214
Nov  6 12:42:25 localhost smartd[1927]: Device: /dev/sdo [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 230 to 222
Nov  6 12:42:26 localhost smartd[1927]: Device: /dev/sdp [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 214 to 222
Nov  6 12:59:05 localhost -- MARK --
Nov  6 14:29:21 localhost kernel: [    0.000000] Initializing cgroup subsys cpuset
Nov  6 14:29:21 localhost kernel: [    0.000000] Initializing cgroup subsys cpu
Nov  6 14:29:21 localhost kernel: [    0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 20110819 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Oct$
Nov  6 14:29:21 localhost kernel: [    0.000000] Command line: root=/dev/disk/by-id/ata-Hitachi_HCS5C1016CLA382_JC0150HT0J7TPC-part3 ro
Nov  6 14:29:21 localhost kernel: [    0.000000] BIOS-provided physical RAM map:

EINFACH SO!

ArchLinux 2011-11-21

Dabei war vorher ein Systemupdate gelaufen (inklusive neuem Kernel), aber noch nicht rebootet. 

Nov 21 09:30:27 localhost smartd[2208]: Device: /dev/sdj [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 200 to 206
Nov 21 09:30:30 localhost smartd[2208]: Device: /dev/sdl [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 240 to 250
Nov 21 09:30:31 localhost smartd[2208]: Device: /dev/sdm [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 250 to 240
Nov 21 09:30:35 localhost smartd[2208]: Device: /dev/sdp [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 230 to 240
Nov 21 09:43:32 localhost kernel: [1280595.864622] ------------[ cut here ]------------
Nov 21 09:43:32 localhost kernel: [1280595.864636] WARNING: at drivers/gpu/drm/i915/i915_irq.c:649 ironlake_irq_handler+0x1102/0x1110 [i915]()
Nov 21 09:43:32 localhost kernel: [1280595.864638] Hardware name: H61M-S2V-B3
Nov 21 09:43:32 localhost kernel: [1280595.864639] Missed a PM interrupt
Nov 21 09:43:32 localhost kernel: [1280595.864640] Modules linked in: xfs sha256_generic dm_crypt dm_mod raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx md_mod coretemp nfsd exportfs nfs lockd fscache  auth_rpcgss nfs_acl sunrpc ipv6 ext2 sr_mod cdrom snd_hda_codec_realtek usb_storage uas sg evdev snd_hda_intel snd_hda_codec iTCO_wdt snd_hwdep snd_pcm snd_timer i915 snd drm_kms_helper drm pcspkr i2c_algo_bit r8169 ppdev i2c_i801 shp chp parport_pc intel_agp i2c_core pci_hotplug parport intel_gtt mei(C) soundcore snd_page_alloc processor button mii iTCO_vendor_support video aesni_intel cryptd aes_x86_64 aes_generic ext4 mbcache jbd2 crc16 usbhid hid sd_mod sata_sil24 ahci libahci libata scsi_mod ehci_hcd usbcore
Nov 21 09:43:32 localhost kernel: [1280595.864674] Pid: 0, comm: swapper Tainted: G         C  3.0-ARCH #1
Nov 21 09:43:32 localhost kernel: [1280595.864675] Call Trace:
Nov 21 09:43:32 localhost kernel: [1280595.864676]  <IRQ>  [<ffffffff8105c76f>] warn_slowpath_common+0x7f/0xc0
Nov 21 09:43:32 localhost kernel: [1280595.864684]  [<ffffffff8105c866>] warn_slowpath_fmt+0x46/0x50
Nov 21 09:43:32 localhost kernel: [1280595.864688]  [<ffffffff81078f7d>] ? queue_work+0x5d/0x70
Nov 21 09:43:32 localhost kernel: [1280595.864693]  [<ffffffffa0235a22>] ironlake_irq_handler+0x1102/0x1110 [i915]
Nov 21 09:43:32 localhost kernel: [1280595.864696]  [<ffffffff812a4bc5>] ? dma_issue_pending_all+0x95/0xa0
Nov 21 09:43:32 localhost kernel: [1280595.864699]  [<ffffffff81333db1>] ? net_rx_action+0x131/0x300
Nov 21 09:43:32 localhost kernel: [1280595.864702]  [<ffffffff810bf835>] handle_irq_event_percpu+0x75/0x2a0
Nov 21 09:43:32 localhost kernel: [1280595.864705]  [<ffffffff810bfaa5>] handle_irq_event+0x45/0x70
Nov 21 09:43:32 localhost kernel: [1280595.864707]  [<ffffffff810c21af>] handle_edge_irq+0x6f/0x120
Nov 21 09:43:32 localhost kernel: [1280595.864710]  [<ffffffff8100d9f2>] handle_irq+0x22/0x40
Nov 21 09:43:32 localhost kernel: [1280595.864712]  [<ffffffff813f66aa>] do_IRQ+0x5a/0xe0
Nov 21 09:43:32 localhost kernel: [1280595.864715]  [<ffffffff813f4393>] common_interrupt+0x13/0x13
Nov 21 09:43:32 localhost kernel: [1280595.864716]  <EOI>  [<ffffffff81273cdb>] ? intel_idle+0xcb/0x120
Nov 21 09:43:32 localhost kernel: [1280595.864720]  [<ffffffff81273cbd>] ? intel_idle+0xad/0x120
Nov 21 09:43:32 localhost kernel: [1280595.864723]  [<ffffffff81313d9d>] cpuidle_idle_call+0x9d/0x350
Nov 21 09:43:32 localhost kernel: [1280595.864726]  [<ffffffff8100a21a>] cpu_idle+0xba/0x100
Nov 21 09:43:32 localhost kernel: [1280595.864729]  [<ffffffff813d1eb2>] rest_init+0x96/0xa4
Nov 21 09:43:32 localhost kernel: [1280595.864731]  [<ffffffff81748c23>] start_kernel+0x3de/0x3eb
Nov 21 09:43:32 localhost kernel: [1280595.864733]  [<ffffffff81748347>] x86_64_start_reservations+0x132/0x136
Nov 21 09:43:32 localhost kernel: [1280595.864735]  [<ffffffff81748140>] ? early_idt_handlers+0x140/0x140
Nov 21 09:43:32 localhost kernel: [1280595.864737]  [<ffffffff8174844d>] x86_64_start_kernel+0x102/0x111
Nov 21 09:43:32 localhost kernel: [1280595.864738] ---[ end trace 01037f4ec3ec4ee5 ]---
Nov 21 10:00:16 localhost smartd[2208]: Device: /dev/sda [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 206 to 200
Nov 21 10:00:18 localhost smartd[2208]: Device: /dev/sdc [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 200 to 193
Nov 21 10:00:19 localhost smartd[2208]: Device: /dev/sdd [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 206 to 200
Nov 21 10:00:23 localhost smartd[2208]: Device: /dev/sdg [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 206 to 200
Nov 21 10:00:29 localhost smartd[2208]: Device: /dev/sdl [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 250 to 240
Nov 21 10:00:30 localhost smartd[2208]: Device: /dev/sdm [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 240 to 250
Nov 21 10:00:33 localhost smartd[2208]: Device: /dev/sdp [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 240 to 230
Nov 21 10:00:34 localhost smartd[2208]: Device: /dev/sdq [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 240 to 250
Nov 21 11:52:01 localhost kernel: [    0.000000] Initializing cgroup subsys cpuset
Nov 21 11:52:01 localhost kernel: [    0.000000] Initializing cgroup subsys cpu
Abgerufen von „https://dergagi.changeip.org/w/index.php?title=Store_2.0&oldid=527“